H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – HWPing
H3C S7500 Series Ethernet Switches Chapter 1
HWPing Configuration
1-3
To do...
Use the
command...
Remarks
Configure the
destination IP
address of the test
destination-ip
ip-address
Required
By default, no destination
IP address is configured.
Configure the type
of the test
test-type type
Optional
By default, the test type is
ICMP.
Configure the
packet sending
times in each test
count times
Optional
By default, the packet
sending times in each test
is 1.
Configure the
automatic test
interval
frequency
interval
Optional
By default, the automatic
test interval is zero, that
is, no automatic test is
performed.
Configure
the test
parameters
Configure the
timeout time of the
test
timeout time
Optional
By default, the timeout
time is 3 seconds.
Execute the test
test-enable
Required
1.2.3 Displaying HWPing Configuration
To do... Use the command... Remarks
Display the information of
HWPing test history
display hwping history
[ administrator-name operation-tag ]
Display the latest HWPing
test results
display hwping results
[ administrator-name operation-tag ]
Available in
any view
1.2.4 Configuration Example
I. Network requirements
Perform a HWPing ICMP test between two switches. Like a ping test, this test uses
ICMP to test the roundtrip time of data packets between the source and the destination.
II. Configuration procedure
# Enable the HWPing client.
<H3C> system-view
System View: return to User View with Ctrl+Z.