H3C S7500 Series Ethernet Switches Operation Manual

Operation Mannual – RRPP
H3C S7500 Series Ethernet Switches Chapter 1
RRPP Configuration
1-19
II. Network diagram
GE2/0/1
GE2/0/2
GE2/0/1
GE2/0/2
GE2/0/1
GE2/0/2
GE2/0/1
GE2/0/2
GE2/0/
GE2/0/
Switch A Switch B
Switch C
Switch D
E
Master node
Transit node
Assistant edge node
Domain 1
Ring 1
Ring
GE
3
3
Switch E
dge node
2
GE2/0/1
2/0/2
Master node
Figure 1-6 Network diagram for intersectant ring topology
III. Configuration procedure
z Configure Switch A
<H3C> system-view
[H3C] rrpp domain 1
[H3C-rrpp-domain1] control-vlan 4092
[H3C-rrpp-domain1] ring 1 node-mode master primary-port GigabitEthernet2/0/1
secondary-port GigabitEthernet2/0/2 level 0
[H3C-rrpp-domain1] ring 1 enable
[H3C-rrpp-domain1] quit
[H3C] rrpp enable
z Configure Switch B
<H3C> system-view
[H3C] rrpp domain 1
[H3C-rrpp-domain1] control-vlan 4092
[H3C-rrpp-domain1] ring 1 node-mode transit primary-port GigabitEthernet2/0/1
secondary-port GigabitEthernet2/0/2 level 0
[H3C-rrpp-domain1] ring 2 node-mode edge common-port GigabitEthernet 2/0/2
edge-port GigabitEthernet 2/0/3
[H3C-rrpp-domain1] ring 1 enable
[H3C-rrpp-domain1] ring 2 enable
[H3C-rrpp-domain1] quit
[H3C] rrpp enable
z Configure Switch C
<H3C> system-view
[H3C] rrpp domain 1