H3C S7500 Series Ethernet Switches Operation Manual

Operation Mannual – RRPP
H3C S7500 Series Ethernet Switches Chapter 1
RRPP Configuration
1-20
[H3C-rrpp-domain1] control-vlan 4092
[H3C-rrpp-domain1] ring 1 node-mode transit primary-port GigabitEthernet2/0/1
secondary-port GigabitEthernet2/0/2 level 0
[H3C-rrpp-domain-1] ring 2 node-mode assistant-edge common-port
GigabitEthernet 2/0/1 edge-port GigabitEthernet 2/0/3
[H3C-rrpp-domain1] ring 1 enable
[H3C-rrpp-domain1] ring 2 enable
[H3C-rrpp-domain1] quit
[H3C] rrpp enable
z Configure Switch D
<H3C> system-view
[H3C] rrpp domain 1
[H3C-rrpp-domain1] control-vlan 4092
[H3C-rrpp-domain1] ring 1 node-mode transit primary-port GigabitEthernet2/0/1
secondary-port GigabitEthernet2/0/2 level 0
[H3C-rrpp-domain1] ring 1 enable
[H3C-rrpp-domain1] quit
[H3C] rrpp enable
z Configure Switch E
<H3C> system-view
[H3C] rrpp domain 1
[H3C-rrpp-domain1] control-vlan 4092
[H3C-rrpp-domain1] ring 2 node-mode master primary-port GigabitEthernet2/0/1
secondary-port GigabitEthernet2/0/2 level 1
[H3C-rrpp-domain1] ring 2 enable
[H3C-rrpp-domain1] quit
[H3C] rrpp enable
After the configuration, you can use the display command to view the RRPP
configuration and packet statistics.