H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – NAT, Netstream, Policy Routing
H3C S7500 Series Ethernet Switches Chapter 2
Netstream Configuration
2-3
Task Remarks
Enabling Netstream Required
Entering Netstream Aggregation View Required
Enabling the Corresponding Aggregation Mode Optional
Configuring the Address Information for Netstream Export Packets Optional
Configuring the Version and AS Option for Netstream Export
Packets
Optional
Configuring the DSCP Value for Netstream Export Packets Optional
Configuring Netstream Entry Aging Time Optional
Configuring the Ways to Update the Template for Version 9
Netstream Packets
Optional
 Note:
Currently the Netstream and the L3+ traffic accounting functions cannot be enabled
simultaneously.
2.2.2 Enabling Netstream
Follow these steps to enable Netstream:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable Netstream
ip netstream inbound source
srcslot-number to dstslot-number [ acl
acl-number ]
Or
ip netstream outbound source
srcslot-number to dstslot-number
Required
By default,
Netstream is
disabled.
Caution:
Netstream configuration only applies to the permit rules in the ACL.
2.2.3 Entering Netstream Aggregation View
Use the ip netstream aggregation command to enter a Netstream aggregation view.