H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Hardware-Dependent Software Configuration

H3C S7500 Series Ethernet Switches Table of Contetnts

Table of Contents

Chapter 1 Hardware-Dependent Software Configuration.......................................................... 1-1

1.1 Configuring Boot ROM Upgrade with App File.................................................................. 1-1

1.1.1 Boot ROM Upgrade Configuration.......................................................................... 1-1

1.1.2 Boot ROM Upgrade Configuration Example........................................................... 1-2

1.2 Configuring Inter-Card Link State Adjustment................................................................... 1-2

1.2.1 Introduction.............................................................................................................. 1-2

1.2.2 Inter-Card Link State Adjustment Configuration ..................................................... 1-3

1.3 Configuring Internal Channel Monitoring........................................................................... 1-3

1.3.1 Introduction.............................................................................................................. 1-3

1.3.2 Monitoring Internal Channel Configuration ............................................................. 1-4

1.4 Configuring Switch Chip Auto-Reset ................................................................................. 1-4

1.4.1 Introduction.............................................................................................................. 1-4

1.4.2 Switch Chip Auto-reset Configuration..................................................................... 1-5