H3C S7500 Series Ethernet Switches Operation Manual

Operation Manual – Hardware-Dependent Software Configuration
H3C S7500 Series Ethernet Switches
Chapter 1 Hardware-Dependent
Software Configuration
1-5
1.4.2 Switch Chip Auto-reset Configuration
Follow these steps to configure switch chip auto-reset:
To do... Use the command... Remarks
Enter system view system-view —
Enable the function of
monitoring internal
channels
monitor inner-channel
Required
Enable switch chip
auto-reset
monitor slot slot-id
enable
Required
By default, switch chips
cannot be reset
automatically when the
internal channel
handshake fails
Disable switch chip
auto-reset
monitor slot slot-id
disable
Optional