H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-2
1.2 Configuration Guide
 Note:
z This configuration guide takes S7500 series Ethernet switches as an example.
z For configuration precautions, see corresponding operation manuals and command
manuals.
1.2.1 Configuration Task List
Table 1-1 Configuration task List
Task Details
Static route configuration 1.2.2
RIP configuration 1.2.3
OSPF configuration 1.2.4
ISIS Configuration 1.2.5
BGP configuration 1.2.6
Route Policy Configuration 1.2.7
1.2.2 Static Route Configuration
Table 1-2 Configure a static route
Operation Command Remarks
Enter system view
system-view
—
Configure a static
route
ip route-static ip-address { mask |
mask-length } { interface-type
interface-number | next-hop }
[ preference preference-value ]
[ reject | blackhole ]
Required
By default, the system
can obtain the route to
the subnet directly
connected to the
router.