H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-5
Operation Command Remarks
Set the additional routing
metric to be added for
incoming RIP routes on
this interface
rip metricin value
Optional
By default, the additional
routing metric added for
incoming routes on an
interface is 0.
Set the additional routing
metric to be added for
outgoing RIP routes on
this interface
rip metricout value
Optional
By default, the additional
routing metric added for
outgoing routes on an
interface is 1.
V. Configuring RIP route summarization
Table 1-8 Configure RIP route summarization
Operation Command Remarks
Enter system view
system-view
—
Enter RIP view
rip
—
Enable RIP-2 automatic
route summarization
summary
Required
By default, RIP-2 automatic route
summarization is enabled.
VI. Disabling the router from receiving host routes
Table 1-9 Disable the router from receiving host routes
Operation Command Remarks
Enter system view
system-view
—
Enter RIP view
rip
—
Disable the router from
receiving host routes
undo host-route
Required
By default, the router
receives host routes.
VII. Configuring RIP to filter incoming/outgoing routes
Table 1-10 Configure RIP to filter incoming/outgoing routes
Operation Command Remarks
Enter system view
system-view
—
Enter RIP view
rip
—