H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-7
X. Configuring RIP to redistribute routes from another protocol
Table 1-13 Configure RIP to import routes from another protocol
Operation Command Remarks
Enter system view
system-view
—
Enter RIP view
rip
—
Configure a default cost
for an incoming route
default cost value
Optional
1 by default.
Configure RIP to
redistribute routes from
another protocol
import-route protocol
[ process-id | allow-ibgp ]
[ cost value |
route-policy
route-policy-name ]*
Required
By default, RIP does
redistribute any route from
other protocols.
XI. Configuring RIP timers
Table 1-14 Configure RIP timers
Operation Command Remarks
Enter system view
system-view
—
Enter RIP view
rip
—
Set the RIP timers
timers { update
update-timer | timeout
timeout-timer } *
Required
By default, the Update timer is
set 30 seconds and the
Timeout timer to 180 seconds.
XII. Configuring split horizon
Table 1-15 Configure split horizon
Operation Command Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Enable split horizon
rip split-horizon
Required
Enabled by default.