H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-12
V. Configuring the DR Priority on an OSPF Interface
Table 1-24 Configure the DR priority on an OSPF interface
Operation Command Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Configure the DR priority
on the OSPF interface
ospf dr-priority priority
Optional
The default DR priority is 1.
VI. Configuring OSPF Route Summarization
Table 1-25 Configure ABR route summarization
Operation Command Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id
[ router-id router-id ] ]
—
Enter area view
area area-id
—
Enable ABR route
summarization
abr-summary ip-address
mask [ advertise |
not-advertise ]
Required
This command takes effect only
when it is configured on an
ABR. By default, this function is
disabled on an ABR.
Table 1-26 Configure ASBR route summarization
Operation Command Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id
[ router-id router-id ] ]
—
Enable ASBR route
summarization
asbr-summary ip-address
mask [ not-advertise | tag
value ]
Required
This command takes effect
only when it is configured on an
ASBR. By default,
summarization of imported
routes is disabled.