H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-15
Operation Command Remarks
Configure the hello
interval on the interface
ospf timer hello seconds
Optional
By default, p2p and
broadcast interfaces
send Hello packets every
10 seconds; while p2mp
and NBMA interfaces
send Hello packets every
30 seconds.
Configure the poll interval
on the NBMA interface
ospf timer poll seconds
Optional
By default, poll packets
are sent every 40
seconds.
Configure the dead time
of the neighboring router
on the interface
ospf timer dead seconds
Optional
By default, the dead time
for the OSPF neighboring
router on a p2p or
broadcast interface is 40
seconds and that for the
OSPF neighboring router
on a p2mp or NBMA
interface is 120 seconds.
Configure the interval for
retransmitting an LSA on
an interface
ospf timer retransmit
interval
Optional
By default, this interval is
five seconds.
XII. Configure the LSA transmission delay
Table 1-32 Configure the LSA transmission delay
Operation Command Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Configure the LSA
transmission delay
ospf trans-delay
seconds
Optional
By default, the LSA
transmission delay is one
second.