H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-16
XIII. Configuring the SPF Calculation Interval
Table 1-33 Configure the SPF calculation interval
Operation Command Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id
[ router-id router-id ] ]
—
Configure the SPF
calculation interval
spf-schedule-interval
interval
Optional
By default, the SPF
calculation interval is five
seconds.
XIV. Disabling OSPF Packet Transmission on an Interface
Table 1-34 Disable OSPF packet transmission on an interface
Operation Command Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id
[ router-id router-id ] ]
—
Disable OSPF packet
transmission on a
specified interface
silent-interface
silent-interface-type
silent-interface-number
Optional
By default, all the
interfaces are allowed to
transmit OSPF packets.
XV. Configuring OSPF Authentication
Table 1-35 Configure OSPF authentication
Operation Command Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id
[ router-id router-id ] ]
—
Enter OSPF area view
area area-id
—
Configure the
authentication mode of
the OSPF area
authentication-mode
{ simple | md5 }
Required
By default, no
authentication mode is
configured for an area.
Return to OSPF view
quit
—
Return to system view
quit
—
Enter interface view
interface interface-type
interface-number
—