H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-22
XI. Enabling Default Route Advertisement
Table 1-50 Enable default route advertisement
Operation Command Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ]
—
Enable default route
advertisement
default-route-advertise
[ route-policy
route-policy-name ]
Required
Only the same level routers
can accept the default route.
XII. Configuring a Preference for IS-IS
Table 1-51 Configure a preference for IS-IS
Operation Command Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ]
—
Configure a
preference for IS-IS
preference [ value | clns | ip ]
Required
15 by default.
XIII. Specifying an IS-IS Cost Style
Table 1-52 Specify an IS-IS cost style
Operation Command Remarks
Enter system view
System-view
—
Enter IS-IS view isis [ tag ]
—
Specify an IS-IS cost
style
cost-style { narrow | wide |
wide-compatible | { compatible |
narrow-compatible }
[ relax-spf-limit ] }
Required
narrow by
default.
XIV. Specifying a Cost for an Interface
Table 1-53 Specify a cost for an interface
Operation Command Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—