H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-24
Table 1-57 Specify the interval for retransmitting an LSP for an interface
Operation Command Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Specify the interval for
retransmitting an LSP on
a P2P link
isis timer retransmit seconds
Required
5 seconds by
default.
Table 1-58 Specify a hello multiplexer for an interface
Operation Command Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Specify a hello
multiplexer for the
interface
isis timer holding-multiplier value
[ level-1 | level-2 ]
Required
3 by default.
XVI. Configuring IS-IS Authentication
Table 1-59 Configure IS-IS interface authentication
Operation Command Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type interface-number
—
Configure the IS-IS
authentication mode
and password on the
interface
isis authentication-mode { simple |
md5 } password [ { level-1 | level-2 } [ ip |
osi ] ]
Required
Not
configured by
default.
Table 1-60 Configure IS-IS area and routing domain authentication
Operation Command Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ]
—
Configure the area
authentication
mode and
password
area-authentication-mode { simple | md5 }
password [ ip | osi ]
Optional
Not
configured by
default.