H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-26
XIX. Configuring IS-IS to Discard Checksum Error LSPs
Table 1-64 Configure IS-IS to discard checksum error LSPs
Operation Command Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ]
—
Configure IS-IS to
discard checksum
error LSPs
ignore-lsp-checksum-error
Required
By default, ISIS ignores
checksum error LSPs.
XX. Enabling Logging of Neighbor State Changes
Table 1-65 Enable logging of neighbor state changes
Operation Command Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ]
—
Enable logging of
neighbor state changes
log-peer-change
Required
Disabled by default.
XXI. Configuring the LSP Refresh Interval
Table 1-66 Configure the LSP refresh interval
Operation Command Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ]
—
Configure the LSP
refresh interval
timer lsp-refresh seconds
Required
900 seconds by default.
XXII. Configuring the LSP Age
Table 1-67 Configure the LSP age
Operation Command Remarks
Enter system view
system-view
—
Enter IS-IS view isis [ tag ]
—