H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-30
Operation Command Description
Import the default route to
the BGP routing table
default-route imported
Optional
By default, BGP does not
import default routes to
BGP routing table.
Import and advertise
routing information
generated by other
protocols.
import-route protocol
[ process-id ] [ med
med-value | route-policy
route-policy-name ]*
Required
By default, BGP does not
import nor advertise the
routing information
generated by other
protocols.
Advertise network
segment routes to BGP
routing table
network network-address
[ mask ] [route-policy
route-policy-name ]
Optional
By default, BGP does not
advertise any network
segment routes.
III. Configuring BGP Route Aggregation
Table 1-75 Configure BGP route aggregation
Operation Command Description
Enter system view
system-view
—
Enable BGP, and enter BGP
view
bgp as-number
Required
By default, BGP is
disabled.
Enable
automatic
route
aggregation
summary
Configure
BGP route
aggregation
Enable
manual route
aggregation
aggregate ip-address mask
[ as-set | attribute-policy
route-policy-name |
detail-suppressed |
origin-policy
route-policy-name |
suppress-policy
route-policy-name ]*
Required
By default, routes
are not
aggregated.
IV. Enabling Default Route Advertising
Table 1-76 Enable default rout advertising
Operation Command Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—