H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-31
Operation Command Description
Enable default route
advertising
peer group-name
default-route-advertise
Required
By default, a BGP router
does not send default
routes to a specified
peer/peer group.
V. Configuring route reception filtering policies
Table 1-77 Configure route reception filtering policies
Operation Command Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Configure the global route
reception filtering policy
filter-policy
{ acl-number | gateway
ip-prefix-name |
ip-prefix ip-prefix-name
[ gateway
ip-prefix-name ] } import
Required
By default, the incoming
routing information is not
filtered.
Reference a routing policy
to filter routes from a
peer/peer group
peer { group-name |
ip-address }
route-policy
policy-name import
Required
By default, no route filtering
policy is specified for a
peer/peer group.
Reference
an ACL to
filter BGP
routes from
a peer/peer
group
peer { group-name |
ip-address } filter-policy
acl-number import
Reference
an AS path
ACL to filter
routes from
a peer/peer
group
peer { group-name |
ip-address } as-path-acl
acl-number import
Filter the
routing
information
from a
peer/peer
group
Reference
an IP prefix
list to filter
routes from
a peer/peer
group
peer { group-name |
ip-address } ip-prefix
ip-prefix-name import
Required
By default, no ACL-based
BGP route filtering policy,
AS path ACL-based BGP
route filtering policy, or IP
prefix list-based BGP route
filtering policy is configured
for a peer/peer group.