H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-33
VIII. Configuring BGP Load Balancing
Table 1-80 Configure BGP load balancing
Operation Command Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Configure the maximum
number of equal cost BGP
routes for load balancing
balance num
Required
By default, no load
balancing is configured.
IX. Configuring BGP Route Dampening
Table 1-81 Configure BGP route dampening
Operation Command Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Configure BGP route
dampening-related
parameters
dampening
[ half-life-reachable
half-life-unreachable
reuse suppress ceiling ]
[ route-policy
route-policy-name ]
Required
By default, route dampening is
disabled. Other default route
dampening-related parameters
are as follows.
z half-life-reachable: 15 (in
minutes)
z half-life-unreachable: 15 (in
minutes)
z reuse: 750
z suppress: 2000
z ceiling: 16,000
X. Configuring BGP Route Attributes
Table 1-82 Configure BGP route attributes
Operation Command Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Configure the
management preference of
the exterior, interior and
local routes
preference
ebgp-value
ibgp-value local-value
Optional
By default, the management
preference of the exterior,
interior and local routes is
256, 256, and 130.