H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Routing Overview
1-37
Operation Command Description
Configure the peers to
advertise community
attribute to each other
peer group-name
advertise-community
Required
By default, no community
attribute or extended
community attribute is
advertised to any peer group.
Specify routing policy
for the routes exported
to the peer group
peer group-name
route-policy
route-policy-name export
Required
By default, no routing policy
is specified for the routes
exported to the peer group.
XIV. Configuring BGP RR
Table 1-86 Configure BGP RR
Operation Command Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Configure the local router
as the RR and configure
the peer group as the
client of the RR
peer group-name
reflect-client
Required
By default, no RR or its
client is configured.
Enable route reflection
between clients
reflect between-clients
Optional
By default, route reflection
is enabled between
clients.
Configure cluster ID of an
RR
reflector cluster-id
cluster-id
Optional
By default, an RR uses its
own router ID as the
cluster ID.
XV. Configuring BGP Confederation
Table 1-87 Configure BGP confederation
Operation Command Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—