H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 2 Configuration Examples
2-1
Chapter 2 Configuration Examples
 Note:
The following configuration examples use the S7500 series switches.
2.1 Configuration Examples
2.1.1 Static Routing Configuration Example
I. Network requirements
1) Requirement analysis:
A small company requires any two nodes in its network communicate with each other.
The network should be simple and stable. The customer hopes to make the best use of
the existing devices that do not support dynamic routing protocols.
Based on the customer requirements and networking environment, configure static
routes to realize network interconnection.
2) Network diagram
Figure 2-1 shows the network diagram.
1.1.5.2/24
Switch BSwitch A
Switch C
Host C
Host A
Host B
1.1.5.1/24
1.1.1.1/24
1.1.1.2/24
1.1.2.2/24
1.1.2.1/24 1.1.3.2/24
1.1.3.1/24
1.1.4.1/24
1.1.4.2/24
Figure 2-1 Network diagram for static route configuration