H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples

H3C S7500 Series Ethernet Switches Release 3135 Chapter 2 Configuration Examples

2-3

Device Interface IP Address Device Interface IP Address

Switch A Vlan-int1 110.11.2.1/24 Switch B Vlan-int1 110.11.2.2/24

Vlan-int2 155.10.1.1/24

Vlan-int3 196.38.165.1/24

Switch C Vlan-int1 110.11.2.3/24

Vlan-int4 117.102.0.1/16

Figure 2-2 Network diagram for RIP configuration

II. Configuration procedure

 Note:

Only RIP-related configurations are described below. Before performing the following

configurations, make sure that the data link layer works normally and the IP addresses

of the VLAN interfaces have been configured.

1) Configure Switch A.

# Configure RIP.

<SwitchA> system-view

[SwitchA] rip

[SwitchA-rip] network 110.11.2.0

[SwitchA-rip] network 155.10.1.0

2) Configure Switch B.

# Configure RIP.

<SwitchB> system-view

[SwitchB] rip

[SwitchB-rip] network 196.38.165.0

[SwitchB-rip] network 110.11.2.0

3) Configure Switch C.

# Configure RIP.

<SwitchC> system-view

[SwitchC] rip