H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 2 Configuration Examples
2-8
Total Nets: 2
Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0
 Note:
Since Area2 has no direct connection to Area0, the routing table of RouterA has no
route to Area2.
2) Configure a virtual link
# Configure Switch A.
[SwitchA] ospf
[SwitchA-ospf-1] area 1
[SwitchA-ospf-1-area-0.0.0.1] vlink-peer 2.2.2.2
[SwitchA-ospf-1-area-0.0.0.1] quit
[SwitchA-ospf-1] quit
# Configure Switch B.
[SwitchB-ospf-1] area 1
[SwitchB-ospf-1-area-0.0.0.1] vlink-peer 1.1.1.1
[SwitchB-ospf-1-area-0.0.0.1] quit
# Display the OSPF routing table on Switch A.
[SwitchA]display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
196.1.1.0/24 10 Stub 196.1.1.2 1.1.1.1 0.0.0.0
197.1.1.0/24 10 Net 197.1.1.1 2.2.2.2 0.0.0.1
152.1.1.0/24 20 SNet 197.1.1.1 2.2.2.2 0.0.0.0
Total Nets: 3
Intra Area: 2 Inter Area: 1 ASE: 0 NSSA: 0
Switch A has learned the route 152.1.1.0/24 to Area2.