H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 3 Comprehensive Configuration Example
3-4
3.2 Configuration Procedure
3.2.1 Configuration Guide
Table 3-3 Configuration guide
Configuration task Description
Basic Configuration
Create VLANs and configure IP
addresses for VLAN interfaces
Basic RIPv2/OSPF/BGP Configuration Basic RIPv2/OSPF/BGP configuration
RIP, Static Route, and Routing Policy
Configuration Example
Using a routing policy, configure RIP to
advertise route updates but does not
receive route updates and use static
routing to access the ISP.
BGP and IGP Interaction Configuration
Example
IGP and BGP share routes. Apply a
routing policy for BGP redistribution to
IGP as required
Route Backup Configuration Example
To improve network reliability, run OSPF
on the primary link and run static routing
on the backup link to realize
interconnection
BGP MED Attribute Configuration
Example
Apply a routing policy to change the
MED attribute of routes to control the
forwarding path
3.2.2 Basic Configuration
Creating VLANs and configuring IP addresses for VLAN interfaces are omitted here,
refer to
Displaying the Whole Configuration on Devices for related information.
3.2.3 Basic RIPv2/OSPF/BGP Configuration
I. Basic RIPv2 configuration
Figure 3-2 shows the relevant network diagram of AS 300.