H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Routing Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 3 Comprehensive Configuration Example
3-34
1 166.1.1.1 10 ms 3 ms 3 ms
2 206.1.2.3 13 ms 3 ms 5 ms
3 196.1.1.1 9 ms 3 ms 4 ms
4 196.1.3.3 12 ms 3 ms 3 ms
5 206.1.6.1 14 ms 5 ms 3 ms
II. Verify the backup route is installed into the routing table after the primary
one fails
<S200_10> display ip routing-table
Routing Table: public net
Destination/Mask Protocol Pre Cost Nexthop Interface
0.0.0.0/0 STATIC 200 0 166.1.5.2 Vlan-interface665
127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
162.1.1.0/24 DIRECT 0 0 162.1.1.1 Vlan-interface621
162.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
162.1.2.0/24 DIRECT 0 0 162.1.2.1 Vlan-interface622
162.1.2.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
166.1.5.0/24 DIRECT 0 0 166.1.5.1 Vlan-interface665
166.1.5.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
<S200_10> tracert -a 162.1.1.1 166.1.3.1
traceroute to 166.1.3.1(166.1.3.1) 30 hops max,40 bytes packet
1 166.1.5.2 11 ms 3 ms 4 ms
2 206.1.4.2 13 ms 3 ms 4 ms
3 196.2.2.1 13 ms 3 ms 6 ms
4 196.2.3.3 11 ms 3 ms 4 ms
5 206.1.6.1 12 ms 3 ms 4 ms
3.4.4 Verifying the MED Attribute Configuration
I. Trace the packet forwarding path when the default MED is used
<S400_0> tracert -a 166.1.3.1 162.1.1.1
traceroute to 162.1.1.1(162.1.1.1) 30 hops max,40 bytes packet
1 206.1.6.3 11 ms 3 ms 7 ms
2 196.1.3.1 10 ms 3 ms 8 ms
3 196.1.1.3 8 ms 3 ms 3 ms
4 206.1.2.1 13 ms 4 ms 3 ms
5 166.1.1.2 13 ms 4 ms 3 ms
<S400_0> tracert -a 166.1.3.1 162.1.3.1
traceroute to 162.1.3.1(162.1.3.1) 30 hops max,40 bytes packet
1 206.1.6.3 11 ms 3 ms 3 ms
2 196.1.3.1 14 ms 4 ms 5 ms