H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Multicast Protocol Overview
1-3
To do... Use the command... Remarks
Enter system view system-view —
Enable IGMP Snooping igmp-snooping enable
Required
Disabled by default.
Enter VLAN view
vlan vlan-id
—
Enable IGMP Snooping igmp-snooping enable
Required
Disabled by default.
II. Configuring IGMP-Snooping timers
Follow these steps to configure IGMP-Snooping timers:
To do... Use the command... Remarks
Enter system view system-view —
Configure an aging
timer of router port
igmp-snooping
router-aging-time
seconds
Optional
By default, the router port
aging time is 105 seconds.
Configure a
response-to-query
timer
igmp-snooping
max-response-time
seconds
Optional
By default, the maximum
response-to-query time is 10
seconds.
Configure an aging
timer of a member
port of a multicast
group
igmp-snooping
host-aging-time seconds
Optional
By default, the aging time of
the multicast group member
port is 260 seconds.
III. Configuring fast leave processing
1) Configure fast leave processing in system view
Follow these steps to configure fast leave processing in system view:
To do... Use the command... Remarks
Enter system view system-view —
Configure fast leave
processing
igmp-snooping
fast-leave [ vlan vlan-list ]
Required
Disabled by default
2) Configure fast leave in Ethernet port view
Follow these steps to configure fast leave processing in Ethernet port view: