H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Multicast Protocol Overview
1-5
To do... Use the command... Remarks
Configure maximum
number of multicast
groups that can be joined
on the port
igmp-snooping
group-limit limit [ vlan
vlan-list
[ overflow-replace ] ]
Required
The system default is 256.
VI. Configuring IGMP Snooping querier
Follow these steps to configure IGMP Snooping querier:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable IGMP Snooping
igmp-snooping enable
Required
Enabled by default
Enter VLAN view
vlan vlan-id
—
Enable IGMP Snooping
igmp-snooping enable
Required
Disabled by default
Enable IGMP-Snooping
querier
igmp-snooping querier
Required
Disabled by default
Configure the query
interval
igmp-snooping
query-interval seconds
Optional
The system default is 60
seconds.
Configure a source IP
address for general query
messages
igmp-snooping
general-query source-ip
{ current-interface |
ip-address }
Optional
The system default is
0.0.0.0.
1.2.2 Configuring IGMP
Complete these tasks to configure IGMP:
Configuration task Remarks
Enabling IGMP Required
Configuring IGMP version Optional
Configuring parameters related to IGMP queries Optional
Configuring the maximum allowed number of multicast groups Optional
Configuring a multicast group filter Optional
Configuring simulated joining Optional
Configuring IGMP proxy Optional