H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Multicast Protocol Overview
1-9
Follow these steps to configure simulated joining in VLAN interface view:
To do... Use the command... Remarks
Enter system view system-view —
Enter VLAN interface view
interface Vlan-interface
interface-number
—
Configure simulated
joining
igmp host-join
group-address port
interface-list
Optional
Disabled by default
2) Configure simulated joining in Ethernet port view
Follow these steps to configure simulated joining in VLAN interface view:
To do... Use the command... Remarks
Enter system view system-view —
Enter Ethernet port view
interface interface-type
interface-number
—
Configure simulated
joining
igmp host-join
group-address vlan
vlan-id
Optional
Disabled by default
Caution:
Before configuring simulated joining, you must enable IGMP in VLAN interface view.
If you configure a port as a simulated host in Ethernet port view, the Ethernet port must
belong to the specified VLAN; otherwise the configuration does not take effect.
VII. Configuring IGMP proxy
Follow these steps to configure IGMP proxy:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable multicast routing
multicast
routing-enable
Required
Enter VLAN interface view
interface Vlan-interface
interface-number
—
Enable IGMP
igmp enable
Required