H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Multicast Protocol Overview
1-11
1.2.3 Configuring PIM
I. Configuring PIM-DM
Follow these steps to configure PIM-DM:
To do... Use the command... Remarks
Enter system view system-view —
Enable multicast routing
multicast
routing-enable
Required
Disabled by default
Enter PIM view
pim
—
Configure a multicast
source or multicast
source-group filter
source-policy
acl-number
Optional
You can define the related
IP addresses in an ACL.
Enter VLAN interface view
interface Vlan-interface
interface-number
—
Enable PIM-DM
pim dm
Required
Configure the hello
interval on the interface
pim timer hello seconds
Optional
The system default is 30
seconds.
Configure a limit on the
number of PIM neighbors
on the interface
pim neighbor-limit limit
Optional
The default value is 128.
Configure the filtering
policy for PIM neighbors
pim neighbor-policy
acl-number
Optional
You can define the related
IP addresses in an ACL.
Disabled by default
II. Configuring PIM-SM
Follow these steps to configure PIM-SM:
To do... Use the command... Remarks
Enter system view system-view —
Enable multicast routing
multicast
routing-enable
Required
Disabled by default
Enter PIM view
pim
—
Configure a multicast
source or multicast
source-group filter
source-policy
acl-number
Optional
You can define the related
IP addresses in an ACL.