H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 Multicast Protocol Overview
1-13
To do... Use the command... Remarks
Configuring a PIM-SM
domain boundary
pim bsr-boundary
Optional
By default, no PIM-SM
domain boundary is
configured
Configure the hello
interval on the interface
pim timer hello seconds
Optional
The system default is 30
seconds.
Configure the maximum
number of PIM neighbors
allowed on the interface
pim neighbor-limit limit
Optional
The default value is 128.
Configure the filtering
policy for PIM neighbors
pim neighbor-policy
acl-number
Optional
You can define the related
IP addresses in an ACL.
Disabled by default
 Note:
Currently the device supports only 0 for traffic-rate and the use of the infinity keyword
in the spt-switch-threshold command.
z If you use 0 for traffic-rate, the device, working as the last-hop router, will initiate an
RPT-to-SPT switchover as soon as it receives the first multicast packet.
z If you use the infinity keyword in the command, the device will never initiate an
RPT-to-SPT switchover.