H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135
Chapter 2 Multicast Protocol
Configuration Examples
2-4
[SwitchD-Vlan-interface103] pim dm
[SwitchD-Vlan-interface103] quit
[SwitchD] interface vlan-interface 101
[SwitchD-Vlan-interface101] pim dm
[SwitchD-Vlan-interface101] quit
[SwitchD] interface vlan-interface 102
[SwitchD-Vlan-interface102] pim dm
[SwitchD-Vlan-interface102] quit
# Enable IGMP Snooping on Switch E, and enable IGMP Snooping in VLAN 100.
<SwitchE> system-view
[SwitchE] igmp-snooping enable
Enable IGMP-Snooping ok.
[SwitchE] vlan 100
[SwitchE-vlan100] igmp-snooping enable
[SwitchE-vlan100] quit
IV. Verifying the configuration
Now start sending multicast data to multicast group 224.1.1.1 from Source and start
receiving the multicast data on Host A, and take the following steps to verify the
configurations made on the switches.
1) Check whether the multicast stream can flow to Host A.
# View the PIM neighboring relationships on Switch D.
<SwitchD> display pim neighbor
Neighbor's Address Interface Name Uptime Expires
192.168.2.1 Vlan-interface101 02:45:04 00:04:46
192.168.3.1 Vlan-interface102 02:42:24 00:04:45
192.168.1.1 Vlan-interface103 02:43:44 00:05:44
# View the multicast forwarding table of Switch D.
<SwitchD> display multicast forwarding-table
Multicast Forwarding Cache Table
Total 1 entry: 0 entry created by IP, 1 entry created by protocol
00001. (10.110.5.110, 224.1.1.1), iif Vlan-interface1, 1 oifs,
Protocol Create
List of outgoing interface:
01: Vlan-interface101
Matched 181 pkts(271500 bytes), Wrong If 0 pkts
Forwarded 130 pkts(195000 bytes)
Total 1 entry Listed