H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135
Chapter 2 Multicast Protocol
Configuration Examples
2-7
Total 0 MAC Group(s).
Vlan(id):200.
Total 0 IP Group(s).
Total 0 MAC Group(s).
Static router port(s):
Dynamic router port(s):
Ethernet1/0/19
With multicast group filtering enabled, the corresponding ports drop IGMP reports for
the filtered group and will be removed for that group when their respective port aging
timer expires.
3) Configure IGMP multicast group filtering on Switch A.
# Disable multicast group filtering on Switch E.
<SwitchE> system-view
[SwitchE] undo igmp-snooping group-policy
 Note:
To verify the configuration of IGMP multicast group filtering on Switch A, disable IGMP
Snooping multicast group filtering on Switch E first.
Configure to filter the multicast group 224.1.1.1 on VLAN-interface 100 of Switch A, and
then display the multicast forwarding entries of Switch A.
# Configure to filter the multicast group 224.1.1.1 on VLAN-interface 100 of Switch A.
<SwitchA> system-view
[SwitchA] acl number 2000
[SwitchA-acl-basic-2000] rule deny source 224.1.1.1 0
[SwitchA-acl-basic-2000] rule permit source any
[SwitchA-acl-basic-2000] quit
[SwitchA] interface Vlan-interface 100
[SwitchA-Vlan-interface100] igmp group-policy 2000
[SwitchA-Vlan-interface100] return
# View multicast forwarding entries on Switch A.
<SwitchA> display multicast forwarding-table
Multicast Forwarding Cache Table
Total 1 entry: 0 entry created by IP, 1 entry created by protocol
00001. (10.110.5.100, 224.1.1.1), iif Vlan-interface101, 0 oifs,
Protocol Create