H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135
Chapter 2 Multicast Protocol
Configuration Examples
2-9
3) Switch B and Switch C connect to stub network N1 through their respective
VLAN-interface 200, and to Switch E through VLAN-interface 103 and
VLAN-interface 104 respectively.
4) It is required that VLAN-interface 105 of Switch D and VLAN-interface 102 of
Switch E act as C-BSR and C-RP.
5) IGMPv2 is required on VLAN-interface 100 of Switch A. IGMP Snooping is
required on Switch F and in VLAN 100. IGMPv2 is also required between Switch B,
Switch C, and stub network N1. Typically, Switch B acts as the querier.
2.2.3 Network Diagram
Ethernet
Ethernet
Source
10.110.5.100/24
PIM-SM
Switch A
Switch B
Switch C
Switch D
Host C
Host D
Receiver
N1
Switch E
Vlan-int200
Vlan-int200
Vlan-int300
Vlan-int102
Vlan-int102
Vl
a
n-int101
Vl
an-i
nt
101
Vlan-int103
Vlan-int103
Vlan-int104
Vlan-int104
Vlan-int105
Vlan-int105
Receiver
Host A
Host B
Vlan-int100
Vlan100
Switch F
Device Interface IP address Ports
Switch A Vlan-int100 10.110.1.1/24 Ethernet1/0/1
Vlan-int101 192.168.1.1/24 Ethernet1/0/2
Vlan-int102 192.168.9.1/24 Ethernet1/0/3
Switch B Vlan-int200 10.110.2.1/24 Ethernet1/0/1
Vlan-int103 192.168.2.1/24 Ethernet1/0/2
Switch C Vlan-int200 10.110.2.2/24 Ethernet1/0/1
Vlan-int104 192.168.3.1/24 Ethernet1/0/2
Switch D Vlanint300 10.110.5.1/24 Ethernet1/0/1
Vlanint101 192.168.1.2/24 Ethernet1/0/2
Vlanint105 192.168.4.2/24 Ethernet1/0/3
Switch E Vlanint104 192.168.3.2/24 Ethernet1/0/3
Vlanint103 192.168.2.2/24 Ethernet1/0/2
Vlanint102 192.168.9.2/24 Ethernet1/0/1
Vlanint105 192.168.4.1/24 Ethernet1/0/4
Switch F Vlan 100 — Ethernet1/0/1,
Ethernet1/0/2,
Ethernet1/0/3
Figure 2-2 Network diagram for PIM-SM plus IGMP plus IGMP Snooping configuration