H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

Multicast Protocol Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135
Chapter 2 Multicast Protocol
Configuration Examples
2-20
Dynamic router port(s):
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
Host port(s):Ethernet1/0/1
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):Ethernet1/0/1
As shown above, a forwarding entry for the multicast group 224.1.1.1 has been created
on Switch A, with Ethernet 1/0/1 as the member port. Acting as the IGMP Snooping
querier, Switch A does not have a router port.
3) View information on Switch C.
# View IGMP packet statistics on Switch C.
<SwitchC> display igmp-snooping statistics
Received IGMP general query packet(s) number:10.
Received IGMP specific query packet(s) number:0.
Received IGMP V1 report packet(s) number:0.
Received IGMP V2 report packet(s) number:0.
Received IGMP leave packet(s) number:.0
Received error IGMP packet(s) number:0.
Sent IGMP specific query packet(s) number:0.
Switch C received only IGMP general queries from the querier.
# View multicast group information on Switch C.
<Switch C> display igmp-snooping group
Total 0 IP Group(s).
Total 0 MAC Group(s).
Vlan(id):100.
Total 0 IP Group(s).
Total 0 MAC Group(s).
Static router port(s):
Dynamic router port(s):
Ethernet1/0/1
As shown above, no forwarding entries have been created on Switch C. The switch
must flood multicast data in VLAN 100.