H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

QACL Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 QACL Overview
1-4
To do… Use the command... Remarks
Configure traffic
mirroring
mirrored-to inbound
acl-rule [ system-index ]
{ interface interface-type
interface-number
[ reflector ] |
mirroring-group
group-id }
—
Configure packet
filtering
packet-filter inbound
acl-rule [ system-index ]
The acl-rule argument ranges
from 2000 to 5999.
Configure queue
scheduling
queue-scheduler { rr |
strict-priority | wrr
queue1-weight
queue2-weight
queue3-weight
queue4-weight
queue5-weight
queue6-weight
queue7-weight
queue8-weight }
By default, the switch adopts
the SP queue scheduling
algorithm.
Configure traffic
policing
traffic-limit inbound
acl-rule [ system-index ]
[ kbps ] target-rate
[ exceed action ]
With the kbps keyword
specified, the rate limit
granularity is 64 Kbps. That is,
if you input a value in the range
of N*64 to (N+1)*64 (N is a
natural number), the switch
sets the value to (N+1)*64 kbps
automatically.
Configure priority
marking
traffic-priority inbound
acl-rule [ system-index ]
{ { dscp dscp-value |
ip-precedence
pre-value } | { cos cos |
local-precedence
pre-value } }*
You can mark DSCP
precedence, IP precedence,
802.1p precedence, and local
precedence for packets.
Configure traffic
redirecting
traffic-redirect inbound
acl-rule [ system-index ]
{ cpu | interface
interface-type
interface-number }
In traffic redirecting
configuration, the source port
and the destination port must
reside on the same LPU.
Configure
flow-based selective
QinQ
traffic-remark-vlanid
inbound acl-rule
[ system-index ]
remark-vlan vlan-id
Before configuring flow-based
selective QinQ, execute the
vlan-vpn enable command in
the corresponding Ethernet
port view first.
You cannot execute the
vlan-vpn enable command on
a voice VLAN-enabled port.
Type-A LPUs, LS82GT20, and
LS82GP20 do not support
flow-based selective QinQ.