H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

QACL Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 1 QACL Overview
1-5
To do… Use the command... Remarks
Configure traffic
accounting
traffic-statistic inbound
acl-rule [ system-index ]
—
Note that:
z Table 1-2 is the default 802.1p-precedence-to-local-precedence mapping table of
the S7500 series.
Table 1-2 The default 802.1p-precedence-to-local-precedence mapping table
802.1p precedence (CoS) Local precedence
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 7
z The acl-rule argument can be a combination of various ACL rules. Table 1-3 and
Table 1-4 shows the ACL rule combinations that you can apply on type-A LPUs
and non-type-A LPUs respectively.
Table 1-5 explains the form that the acl-rule
argument takes for the combinations.
Table 1-3 Combinations of ACL rules on a type-A LPU
Combination mode Form of acl-rule
Apply all rules in an IP-based ACL (a
basic ACL or advanced ACL)
ip-group { acl-number | acl-name }
Apply one rule in an IP-based ACL (a
basic ACL or advanced ACL)
ip-group { acl-number | acl-name } rule
rule-id
Apply all rules in a Layer-2 ACL link-group { acl-number | acl-name }
Apply one rule in a Layer-2 ACL
link-group { acl-number | acl-name }
rule rule-id