H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

QACL Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 2 QACL Configuration Examples
2-5
[H3C-GigabitEthernet2/0/1] quit
# Configure traffic accounting on GigabitEthernet 2/0/2.
[H3C] interface GigabitEthernet 2/0/2
[H3C-GigabitEthernet2/0/2] qos
[H3C-qosb-GigabitEthernet2/0/2] traffic-statistic inbound ip-group 3001
2.1.2 Line Rate and Traffic Policing Configuration Example
I. Network requirements
In the customer service department, the IP address of PC 3 is 192.168.3.1. Configure
line rate and traffic policing to satisfy the following requirements:
z Limit the rate of Internet-accessing traffic of all the departments to 2 Mbps, and
drop the exceeding traffic.
z Limit the outbound traffic rate of PC 3 in the customer service department to 640
kbps, and drop the exceeding traffic.
II. Network diagram
PC 3
192.168.3.1/24
Internet
GE2/0/3
GE2/0/10
Switch
Server
Customer service
department
VLAN 3
Figure 2-3 Network diagram for line rate and traffic policing configuration
III. Configuration procedure
# Create basic ACL 2000 to sort out the packets with the source IP address
192.168.3.1.
<H3C> system-view