H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

QACL Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 2 QACL Configuration Examples
2-8
# Configure traffic mirroring on GigabitEthernet 2/0/5 to mirror the Internet-accessing
traffic from PC 5 to the data monitoring device.
[H3C] mirroring-group 1 local
[H3C] mirroring-group 1 monitor-port GigabitEthernet 2/0/6
[H3C] interface GigabitEthernet 2/0/5
[H3C-GigabitEthernet2/0/5] qos
[H3C-qosb-GigabitEthernet2/0/5] mirrored-to inbound ip-group 3000 rule 1
interface GigabitEthernet 2/0/6
2.1.4 Configuring Priority Marking and Queue Scheduling
I. Network requirements
In the administration department, the IP address of PC 6 is 192.168.5.1, that of PC 7 is
192.168.5.2, and that of PC 8 is 192.168.5.3. PC 6, PC 7, and PC 8 must access the
station with the IP address 129.110.1.2. Configure priority marking and queue
scheduling for the traffic from PC 6, PC 7, and PC 8 to the station at 129.110.1.2 to
satisfy the following requirements:
z The IP traffic from the three PCs to 129.110.1.2 is processed in the descending
priority order of PC 6, PC 7, and PC 8.
II. Network diagram
Figure 2-5 Network diagram for priority marking and queue scheduling configuration
III. Configuration procedure
# Create advanced ACL 3000 to classify packets from PCs 6 through 8 based on their
source IP addresses.
<H3C> system-view