H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

QACL Configuration Examples

H3C S7500 Series Ethernet Switches Release 3135 Chapter 2 QACL Configuration Examples

2-9

[H3C] acl number 3000

[H3C-acl-adv-3000] rule 0 permit ip source 192.168.5.1 0 destination

129.110.1.2 0

[H3C-acl-adv-3000] rule 1 permit ip source 192.168.5.2 0 destination

129.110.1.2 0

[H3C-acl-adv-3000] rule 2 permit ip source 192.168.5.3 0 destination

129.110.1.2 0

[H3C-acl-adv-3000] quit

# Mark the traffic matching a rule of ACL 3000 with a local precedence value on

GigabitEthernet 2/0/7.

[H3C] interface GigabitEthernet 2/0/7

[H3C-GigabitEthernet2/0/7] qos

[H3C-qosb-GigabitEthernet2/0/7] traffic-priority inbound ip-group 3000 rule

0 local-precedence 5

[H3C-qosb-GigabitEthernet2/0/7] traffic-priority inbound ip-group 3000 rule

1 local-precedence 4

[H3C-qosb-GigabitEthernet2/0/7] traffic-priority inbound ip-group 3000 rule

2 local-precedence 3

[H3C-qosb-GigabitEthernet2/0/7] quit

[H3C-GigabitEthernet2/0/7] quit

# Configure GigabitEthernet 2/0/10 to adopt the SP queue scheduling algorithm.

Because SP is the default, you do not need to configure it unless you have changed the

scheduling algorithm.

[H3C] interface GigabitEthernet 2/0/10

[H3C-GigabitEthernet2/0/10] qos

[H3C-qosb-GigabitEthernet2/0/10] queue-scheduler strict-priority