H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

802.1x Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135
Chapter 3 Enterprise Network Access
Authentication Configuration Example
3-4
802.1x protocol is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Guest Vlan: 10
Version-Check is disabled
The port is a(n) authenticator
Authentication Mode is Auto
Port Control Type is Port-based
ReAuthenticate is disabled
Max on-line user number is 1024
Authentication Success: 0, Failed: 0
EAPOL Packets: Tx 0, Rx 0
Sent EAP Request/Identity Packets : 0
EAP Request/Challenge Packets: 0
Received EAPOL Start Packets : 0
EAPOL LogOff Packets: 0
EAP Response/Identity Packets : 0
EAP Response/Challenge Packets: 0
Error Packets: 0
Controlled User(s) amount to 0
[H3C] display radius cams
SchemeName =cams Index=1 Type=extended
Primary Auth IP =192.168.1.19 Port=1812
Primary Acct IP =192.168.1.19 Port=1813
Second Auth IP =192.168.1.20 Port=1812
Second Acct IP =192.168.1.20 Port=1813
Auth Server Encryption Key= expert
Acct Server Encryption Key= expert
Accounting method = required
Accounting-On packet enable, send times = 40 , interval = 3s
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min) =5
Username format =with-domain
Data flow unit =Byte
Packet unit =1
[H3C] display domain abc
The contents of Domain abc:
State = Active