H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

SSH Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 3 SSH Configuration Examples
3-14
Figure 3-14 SSH client interface
3.1.3 When the Switch Acts as an SSH Client and the Authentication
Type is Password
I. Network requirements
As shown in Figure 3-15, establish an SSH connection between Switch A (SSH Client)
and Switch B (SSH Server) for secure data exchange. The user name for login is
client001 and the SSH server’s IP address is 10.165.87.136. Password authentication
is required.
II. Network diagram
Figure 3-15 Network diagram of SSH client configuration when using password
authentication
III. Configuration procedure
1) Configure Switch B
# Create a VLAN interface on the switch and assign an IP address, which the SSH
client will use to connect with the SSH server.