H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

SSH Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 3 SSH Configuration Examples
3-15
<H3C> system-view
[H3C] interface vlan-interface 1
[H3C-Vlan-interface1] ip address 10.165.87.136 255.255.255.0
[H3C-Vlan-interface1] quit
# Generate an RSA key pair.
[H3C] rsa local-key-pair create
# Set the authentication mode for the user interface to AAA.
[H3C] user-interface vty 0 4
[H3C-ui-vty0-4] authentication-mode scheme
# Enable the user interface to support SSH.
[H3C-ui-vty0-4] protocol inbound ssh
[H3C-ui-vty0-4] quit
# Create local user “client001”, and set the authentication password to “abc”, the login
protocol to SSH, and user command privilege level to 3.
[H3C] local-user client001
[H3C-luser-client001] password simple abc
[H3C-luser-client001] service-type ssh level 3
[H3C-luser-client001] quit
Caution:
This example configures the server to use local authentication, therefore the AAA
scheme referenced by the ISP domain must be a local authentication scheme.
Otherwise, the client cannot log into the server.
# Configure the authentication type of user “client001” as password.
[H3C] ssh user client001 authentication-type password
2) Configure Switch A
# Create a VLAN interface on the switch and assign an IP address, which serves as the
SSH client’s address in an SSH connection.
<H3C> system-view
[H3C] interface vlan-interface 1
[H3C-Vlan-interface1] ip address 10.165.87.137 255.255.255.0
[H3C-Vlan-interface1] quit
# Establish a connection to the server 10.165.87.136.
[H3C] ssh2 10.165.87.136
Username: client001