H3C S7500 Series Ethernet Switches Release 3135 DHCP Configuration Examples

SSH Configuration Examples
H3C S7500 Series Ethernet Switches Release 3135 Chapter 3 SSH Configuration Examples
3-17
# Set the authentication mode for the user interfaces to AAA.
[H3C] user-interface vty 0 4
[H3C-ui-vty0-4] authentication-mode scheme
# Enable the user interfaces to support SSH.
[H3C-ui-vty0-4] protocol inbound ssh
# Set the user command privilege level to 3.
[H3C-ui-vty0-4] user privilege level 3
[H3C-ui-vty0-4] quit
# Specify the authentication type of user “client001” as RSA.
[H3C] ssh user client001 authentication-type rsa
 Note:
Before proceeding with the following steps, you need to generate an RSA key pair on
the client, and manually configure the RSA public key on the SSH server. For detailed
information, refer to SSH client configuration.
# Configure the public key of the SSH client on the SSH server, and specify the public
key name as Switch001.
[H3C] rsa peer-public-key Switch001
RSA public key view: return to System View with "peer-public-key end".
[H3C-rsa-public-key] public-key-code begin
RSA key code view: return to last view with "public-key-code end".
[H3C-rsa-key-code] 3047
[H3C-rsa-key-code] 0240
[H3C-rsa-key-code] C8969B5A 132440F4 0BDB4E5E 40308747 804F608B
[H3C-rsa-key-code] 349EBD6A B0C75CDF 8B84DBE7 D5E2C4F8 AED72834
[H3C-rsa-key-code] 74D3404A 0B14363D D709CC63 68C8CE00 57C0EE6B
[H3C-rsa-key-code] 074C0CA9
[H3C-rsa-key-code] 0203
[H3C-rsa-key-code] 010001
[H3C-rsa-key-code] public-key-code end
[H3C-rsa-public-key] peer-public-key end
[H3C]
# Assign the public key Switch001 to user client001.
[H3C] ssh user client001 assign rsa-key Switch001