H3C S7500E Series Ethernet Switches Command Manual

Command Manual – ACL
H3C S7500E Series Ethernet Switches Chapter 1 ACL Configuration Commands
1-4
Time-range : trname ( Inactive )
from 15:00 1/28/2006 to 15:00 1/28/2008
Table 1-2 Description on the fields of the display time-range command
Field Description
Current time Current system time
Time-range
The configuration and state of time range, such as time range
name, its activated state, and start time and ending time.
1.1.3 time-range
Syntax
time-range time-name { start-time to end-time days [ from time1 date1 ] [ to time2
date2 ] | from time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-name [ start-time to end-time days [ from time1 date1 ] [ to
time2 date2 ] | from time1 date1 [ to time2 date2 ] | to time2 date2 ]
View
System view
Parameters
time-name: Time range name comprising 1 to 32 characters. It is case insensitive and
must start with an English letter. To avoid confusion, this name cannot be all.
start-time: Start time of a periodic time range, in hh:mm format as 24-hour time, where
hh is hours and mm is minutes. Its value ranges from 00:00 to 23:59.
end-time: End time of the periodic time range, in hh:mm format as 24-hour time, where
hh is hours and mm is minutes. Its value ranges from 00:00 to 24:00. The end time must
be greater than the start time.
days: Indicates on which day or days of the week the periodic time range is valid. You
may specify multiple values, in words or in digits, separated by spaces, for this
argument, but make sure that they do not overlap. These values can take one of the
following forms:
z A digit in the range 0 to 6, respectively for Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, and Saturday.
z Week in words, that is, Mon, Tue, Wed, Thu, Fri, Sat, or Sun.
z working-day for Monday through Friday.
z off-day for Saturday and Sunday.
z daily for seven days of a week.