H3C S7500E Series Ethernet Switches Command Manual

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches Chapter 1 Routing Overview Commands
1-6
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 3d23h11m51s
Tag: 0
Destination: 192.168.0.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 192.168.0.72 Interface: Vlan-interface1
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 3d23h08m38s
Tag: 0
Destination: 192.168.0.72/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 3d23h08m40s
Tag: 0
Displayed first are statistics for the whole routing table, followed by detailed description
of each route (in sequence).
Table 1-5 display ip routing-table verbose command output description
Field Description
Destination Destination address/mask length
Protocol Protocol that presents the route
Process ID Process ID
Preference Priority of the route
Cost Cost of the route
NextHop Address of the next hop on the route
Interface Outbound interface for packets to be forwarded along the route
RelyNextHop The next hop address obtained through routing stack.
Neighbour Neighboring address determined by Routing Protocol
Tunnel ID Tunnel ID
Label Label