H3C S7500E Series Ethernet Switches Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-24
Field Description
GR State GR state
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart,
Exchange, Loading or Full
Mode Neighbor mode for DD exchange: master or slave
Priority Router priority
DR The DR on the interface’s network segment
BDR The BDR on the interface’s network segment
MTU Interface MTU
Dead timer due in 40 sec Dead timer times out in 40 seconds
Neighbor is up for 00:12:59 The neighbor has been up for 00:12:59
Authentication Sequence Authentication sequence number
Neighbor state change
count
Count of neighbor state changes
# Display brief OSPF neighbor information.
<Sysname> display ospf peer
OSPF Process 1 with Router ID 192.168.0.138
Neighbor Brief Information
Area: 0.0.0.1
Router ID Address Pri Dead-Time Interface State
192.168.0.136 192.168.0.136 1 37 Vlan1 Full/BDR
Table 3-11 Description on the fields of the display ospf peer command
Field Description
Area Neighbor area
Router ID Neighbor router ID
Address Neighbor interface address
Pri Router priority
Dead time(s) Dead interval remained
Interface Interface connected to the neighbor
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full