H3C S7500E Series Ethernet Switches Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-19
PIM neighbor count: 1
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM override interval (negotiated): 2500 ms
PIM override interval (configured): 2500 ms
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0XF5712241
PIM require generation ID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 180 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM BSR domain border: disabled
Number of routers on network not using DR priority: 0
Number of routers on network not using LAN delay: 0
Number of routers on network not using neighbor tracking: 2
Table 4-6 Description on the fields of the display pim interface verbose command
Field Description
Interface Interface name and its IP address
PIM version Running PIM version
PIM mode PIM mode, dense or sparse
PIM DR DR IP address
PIM DR Priority (configured) Configured priority for DR election
PIM neighbor count Total number of PIM neighbors
PIM hello interval Hello interval
PIM LAN delay (negotiated) Negotiated prune delay
PIM LAN delay (configured) Configured prune delay
PIM override interval (negotiated) Negotiated prune override interval
PIM override interval (configured) Configured prune override interval
PIM neighbor tracking (negotiated)
Negotiated neighbor tracking status
(enabled/disabled)
PIM neighbor tracking (configured)
Configured neighbor tracking status
(enabled/disabled)
PIM generation ID Generation_ID value