H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 4 System Commissioning
4-5
Figure 4-6 Set terminal emulation in the property setting window
4.2 Power-On Startup
4.2.1 Check before Power-On
Before powering on an Ethernet Switch, check if:
z The switch has been mounted steadily.
z All the cards have been correctly installed.
z All the communication cables, fibers, power cables, and grounding cables have
been correctly connected.
z If the voltage of power supply can meet the requirements on the switch.
z The console cable has been correctly connected. The computer or terminal for
configuration has been started and the terminal parameter settings have been
done.