H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 5 Hardware Maintenance
5-11
2) Remove the air filters from the chassis.
5.6.2 Installing and Removing an Air Filter onto/from the Other Models
1
2
1
3
Figure 5-10 Install an air filter (on the S7503E)
I. Installing an air filter
Follow these steps to install an air filter on the chassis:
1) Fasten the two metal air-filter-fixing bars to the chassis (see callout in ①
Figure
5-10).
2) Insert an air filter along the clearance between the upper and lower metal bars and
the chassis at the back of the chassis (see callout in ②
Figure 5-10).
3) Tighten the captive screws to fix the air filter (see callout in ③
Figure 5-10).
II. Removing the air filter
Remove the air filter in the opposite way you install it:
1) Loosen the captive screws on the air filter.
2) Pull the air filter out of the chassis slowly.