H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 6 Software Maintenance
6-9
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-4): 3
Load File name :update.app
3) Enter the file name to enter the download baud rate menu:
Please select your download baudrate:
1. 9600
2. 19200
3. 38400
4. 57600
5. 115200
0. Exit
Enter your choice (0-5):2
4) Choose an appropriate download baud rate. If you select 2 to choose the
download baud rate 19,200 bps, the system displays the following information
after you press Enter:
Please change the terminal's baudrate to 19200 bps and select XMODEM protocol.
Press ENTER key when ready.
 Note:
You do not need to modify the HyperTerminal’s baud rate if you have chosen 9600 bps,
and thus you can skip Step 5 and 6 and go to Step 7 directly. At this time, the system
will not display the above information.
5) Click Disconnect in the HyperTerminal window to disconnect the HyperTerminal
from the switch before setting a baud rate.
6) Select File > Properties in the HyperTerminal window, click Configure in the
popup dialog box, and select the baud rate of 19200 bps in the console port
configuration dialog box.