H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 6 Software Maintenance
6-14
Flash Free Space : 21444608 bytes
The current application file is :SWITCH000.app
The backup application file is : SWITCH100.app
The system displays all files on the Flash, wherein the file number with an asterisk (*) is
the main boot file and the one with a hyphen (-) is the backup boot file.
2) Re-configure the main and backup boot files.
z Set the main boot file.
Enter the sequence number of the desired main boot file when the terminal displays the
following information:
Please input the primary application file number to boot :8
Press Enter and the terminal displays the name of the main boot file you have chosen.
Type Y to confirm it, or N to reset the main boot file.
The primary file you selected is SWITCH100.app, are you sure? Yes or No(Y/N):Y
If you type Y, the terminal displays the following information:
On reboot, SWITCH100.app will become the default primary application file to
boot!
This means the main boot file has been set successfully.
z Set the backup boot file.
You can set the backup boot file in a similar way you set the main boot file. The terminal
displays the following information:
Please input the backup application file number :6
The file you selected is SWITCH200.app, are you sure? Yes or No(Y/N)y
On reboot,SWITCH200.app will become the backup application file to boot!
3) Decide whether to run the main boot file immediately. If you type Y and press
Enter, the system begins to reboot.
Do you want to run SWITCH100.app now?Yes or No(Y/N)?Y
Auto-booting....................
One of the following cases may occur when the system is rebooting:
z The main boot file is correct and the system boots with the main boot file.
z An error occurs to the main boot file, so the system boots with the backup boot file.
z An error occurs to both the main and backup files, so the system randomly
chooses an application file for booting.
z If the system fails to boot with the randomly-chosen application file, it supposes
that the file system is unavailable or no correct boot file is available and thus stops
choosing a boot file.